- Long-Term Bridge Performance (LTBP) Program InfoBridge
- LTBP Program Protocols
- Nondestructive Evaluation (NDE) Web Manual
- Robotic Assisted Bridge Inspection Tool (RABIT™) Bridge Deck Assessment Tool
- NDE Lab Field Test Bed
The Federal Highway Administration (FHWA) LTBP program’s web portal, LTBP InfoBridge™, is a centralized gateway to bridge performance data and information. It provides an efficient interface with visualization capabilities enabling users to perform bridge data analytics.
To ensure that LTBP Program data are collected in a consistent manner over the duration of the program, FHWA is developing data collection protocols for use by practitioners, LTBP Program researchers, and decisionmakers involved with the research, design, construction, inspection, maintenance, and management of bridges. The LTBP Program protocols are for research purposes and intended primarily for use within the LTBP Program.
The LTBP Program protocols are organized into a hierarchy based on the following chronology of a data collection effort for a single bridge: Previsit (PRE), Field Visit (FLD), and Postvisit (PST). This simple chronology was selected to make finding the required protocols intuitive for users. The first three levels of the proposed hierarchy are shown in figure 1.
Figure 1. Illustration. LTBP Program Protocol Hierarchy.
The PRE protocols focus on preparation and actions that occur prior to collecting data at the bridge. This group includes the following activities:
- Sampling and Selection (SS): The process involved with bridge selection.
- Existing Documentation (ED): The obtaining of existing bridge documentation from bridge owners and detailing legacy data mining for specific performance issues.
- Equipment (EQ): Equipment related to structural testing, including sensors and data acquisition systems along with specific protocols related to each type of truck testing.
- Planning and Logistics (PL): Preparation for a field data collection effort, from personnel safety to the processes for maintenance and protection of traffic and site-specific requirements.
The FLD protocols focus on collecting research-quality data in a consistent manner to facilitate comparative analysis across structures and with time. This group contains the following activities:
- Onsite Pretest Activities (OP): Segmentation, identification, and labeling of the various elements of a bridge so recorded findings of the field assessment and testing activities may be tied to specific elements and locations on the bridge.
- Field Data Collection (DC): Data collection at the bridge, including photography, material sampling, NDE, visual inspection, instrumentation logistics, and various types of testing. (Note: this makes up the main portion of the protocols.)
- Data Storage (DS): Proper storage of raw data immediately after collection to ensure no repeat field efforts are required and that no data are lost.
The PST protocols focus on actions taken after the data are collected at the bridge and how the collected data are used to draw conclusions and include the following activities:
- Data Reduction and Processing (DR): Data interpretation methods and steps to evaluate and interpret the data and metadata.
- Archiving and Reporting (AR): Consistency in reporting results as well as formatting data and metadata for inclusion in the LTBP InfoBridge™ Portal.
Released in January 2016, Report FHWA-HRT-16-007, Long-Term Bridge Performance (LTBP) Program Protocols, Version 1, presents the first 51 protocols (selected PRE and FLD protocols) that will be used throughout the LTBP Program for data collection, mining of bridge legacy data, visual inspection, sampling and testing of concrete materials, and NDE of bridges, as well as data management and storage. Future versions of the protocols will be published and include additional protocols that will be implemented in the LTBP Program studies as well as any modifications deemed necessary to the protocols already published.
The NDE Web Manual (figure 2) was conceived and developed to fill a critical knowledge gap between the practitioners dealing with bridge performance challenges on a day-to-day basis and the researchers developing and refining NDE technologies serving them. Over the last decade, there has been an explosion of new assessment tools, but their documentation is fragmented (across refereed and non-refereed literature) and not supported by actual performance data for particular technologies and products. The NDE Web Manual's aim is to provide concise and unbiased guidance to help practitioners navigate their way through a complex and changing landscape to identify the technologies that can serve their specific need.
Through a simple interface, users can search for technologies relevant to specific materials, types of deterioration, and/or infrastructure elements and can easily find definitions and descriptions of unfamiliar terms through the comprehensive glossary.
The manual strikes a balance between treating technologies as black boxes and simply regurgitating the detailed technical literature that is largely irrelevant for end users. To accomplish this, the Manual provides concise descriptions of each technology, including the following:
- The foundational physical principle.
- The performance attributes and limitations.
- The best-practices test procedures and protocols.
- The sample applications and results, among others.
Figure 2. Screen capture. Home page of the NDE Web Manual, Version 1.0.
In the United States, the stewardship and management of approximately 600,000 bridges present ongoing planning, operational, maintenance, and economic challenges for Federal, State, and local transportation agencies. Bridge condition assessments help transportation agencies plan and prioritize structure rehabilitation plans. Collecting data on the health of these bridges, however, can be a time-consuming, labor-intensive, and costly process.
The FWHA's LTBP Program developed a multifunctional NDE platform to enhance assessment of bridge decks. The RABIT™ bridge deck assessment tool was developed to deploy a suite of NDE technologies to collect comprehensive data on surface and subsurface conditions automatically and simultaneously. Recently, a commercially-available model was developed, known as RABIT-CE™ (figure 3).
Figure 3. Photo. View of the RABIT-CE™ bridge deck assessment tool.
The following technologies are incorporated into the robot-assisted, remote-controlled RABIT™ bridge deck assessment tool as shown in figure 4:
- High-resolution industrial cameras to capture high-resolution images of the deck surface.
- Electrical resistivity (ER) to characterize the corrosive environment of the concrete.
- Acoustic array, including impact echo (IE) and ultrasonic surface waves (USW), to evaluate concrete delamination and concrete deck strength.
- Ground penetrating radar (GPR) to "map" rebar and other metallic objects below the surface using electromagnetic waves. GPR also provides a qualitative assessment of concrete deck deterioration.
- Global positioning system (GPS) to record and mark exact location data, making testing grids virtually obsolete.
The unique combination of surface and subsurface condition assessment tools allow bridge managers and engineers to easily identify the anticipated future condition concerns of a bridge deck (figure 4). All of the data collected by the RABIT™ bridge deck assessment tool are tagged with exact GPS coordinates for precise location reference.
Corrosion occurs when moisture and salt penetrate the concrete. As a result, rebar starts to corrode and concrete begins to crack and disintegrate. The RABIT™ bridge deck assessment tool features two NDE technologies that can identify corrosive environments: ER and GPR.
Figure 4. Photo. An example of bridge deck deterioration.
Figure 5. Photo. An example of bridge deck delamination.
Concrete quality degradation is caused by many factors. USW and GPR can detect changes in the quality of the concrete deck, while high-resolution imaging provides visual documentation of deck surface conditions. Delamination (figure 5) is the beginning of the division and separation of layers of a concrete bridge deck, weakening the bridge deck and making it more susceptible to the environment and traffic loads. The RABIT™ bridge deck assessment tool's IE system, GPR, high-resolution imaging, and GPS capabilities precisely locate delaminated areas to enable bridge owners to make the right repair decisions.
The RABIT™ bridge deck assessment tool collects a wide range of data simultaneously—high-resolution photographic, electromagnetic, seismic, and electrical— on external and internal bridge deck conditions. The RABIT-CE™ is transported in a trailer designed and built specifically for it (figure 6). The trailer is towed by a pickup truck. These vehicles are known as the system operational control (SOC) truck and SOC trailer.
The SOC trailer also serves as a mobile command center (figure 7). The data collected by the RABIT™ bridge deck assessment tool is transmitted wirelessly to a computer in the trailer for processing and display. Inside the trailer, engineers and inspectors use the following four main displays: 1) NDE data collection and imaging, 2) data analysis, 3) real-time deck condition data, and 4) crack mapping. This allows engineers and inspectors to analyze and share photographic, seismic, and location data all at one time.
Figure 6. Photo. SOC trailer for the RABIT-CE™ bridge deck assessment tool.
Figure 7. Photo. Mobile command center inside the SOC trailer.
The RABIT™ bridge deck assessment tool can use a high-accuracy GPS to examine a bridge deck on its own, eliminating the need for workers to spend time on the deck making grid markings required for manual NDE tools. Unlike traditional roadway vehicles, the tool's four omnidirectional wheels allow it to move smoothly at a zero radius, which allows the tool to take up less space on the deck and requires only one lane of traffic to be closed at a time. Finally, a laser scanning system protects the RABIT™ bridge deck assessment tool against collision with barriers, curbs, vehicles, and people.
FHWA's Advanced Sensing Technology (FAST) NDE Laboratory located at Turner Fairbank Highway Research Center (TFHRC) is a world class facility for the development and testing of NDE technologies. To assist with ongoing research efforts, the FAST NDE Laboratory maintains an extensive specimen library that includes test beds from a bridge in Virginia and prestressed bridge girders removed from an active bridge on Maryland I–90.
Both of these test beds are available to researchers and vendors of NDE technologies to demonstrate and test their products and technologies. The LTBP Program has developed a memorandum of understanding (MOU) that provides a framework for researchers and vendors to conduct their tests and obtain research results.
In June 2016, the bridge carrying U.S. Route 15 over I–66 was demolished to make way for a new, diverging diamond interchange. This bridge, known in the LTBP Program as the Virginia Pilot Bridge, was subjected to NDE in 2009, 2011, and 2014, and it was also subject to testing under the Strategic Highway Research Program (SHRP2). Bridge deck deterioration knowledge gained through the program was too valuable to let the demolition eliminate this bridge deck from the LTBP Program.
Figure 8. Photo. Virginia pilot bridge slab test bed at TFHRC.
Instead, FHWA identified an opportunity to retain three sections of the bridge deck for continued research at the TFHRC (figure 8). Three sections from the areas previously tested by SHRP2 and the LTBP Program were cut from the deck; each section is 6 by 30 feet. Each section was attached to a strong-back system and transported to TFHRC where a test bed facility was designed and constructed. In addition to preserving the deck slabs for continuing research on deterioration, a research plan was developed for evaluating differential settlement of the test bed abutments.
The FHWA FAST NDE Lab is planning to use the test bed to evaluate NDE technologies that can scan decks with overlays to supplement information in the NDE Web Manual and direct the LTBP Program research on bridge decks with overlays.
The accurate assessment of embedded prestressing strands and tendons is one of the most pressing challenges facing the NDE research community within the civil engineering domain. Given the increased construction of prestressed concrete multi-girder and box girder bridges a half-century ago, and the more recent proliferation of segmental bridges, the deterioration of embedded strands and tendons represents a critical vulnerability to the U.S. bridge population. A key aspect of any mitigation strategy for this vulnerability is developing and validating cost-effective and accurate techniques for the assessment of embedded stands and tendons.
To help advance this development, FHWA has procured and maintains two decommissioned prestressed concrete girders as a testbed for the research community. It is envisioned that this testbed will achieve the following objectives:
- Provide access to realistic, embedded strands to allow researchers to evaluate, validate, and ultimately refine their assessment techniques.
- Facilitate comparative studies of a diverse set of assessment techniques to allow complementary strategies to be identified and integrated.
- Serve as a benchmark of assessment techniques to instill confidence in end users and reduce the time from validation to implementation.
Like the Virginia Pilot Bridge Test Bed, the two American Association of State Highway and Transportation Officials (AASHTO) prestressed concrete girders (figure 9) are available to researchers and vendors to demonstrate and test technologies to evaluate the condition of these girders. Each girder is approximately 60 by 4 feet. The two girders are representative of bridges approaching 50 years of service and are characteristic of thousands of bridges in service today.
Figure 9. Photo. Two AASHTO Prestressed Concrete Girders at TFHRC.
For more information about the prestressed concrete girder test bed, please contact Robert Zobel.