You are here

Policy Review Module

The Policy Review Module checks roadway-segment design elements for compliance with relevant highway geometric design policies. The module provides electronic files replicating quantitative policy values specified by the American Association of State Highway and Transportation Officials (AASHTO) in the 1990, 1994, 2001, 2004, and 2011 editions of “A Policy on Geometric Design of Highways and Streets” and automates checks of design values against those policy values. The Interactive Highway Safety Design Model (IHSDM) also provides a tool for inputting policy tables from other agencies’ design policies.

The module—which is applicable to rural two-lane and rural multilane highways—organizes checks into four categories: cross section, horizontal alignment, vertical alignment, and sight distance. Cross-section checks include through-traveled way width, auxiliary lane width, shoulder width and type, cross slope rollover on curves, bridge width, bike lane width, and (on rural multilane highways only) median width. Horizontal alignment checks include radius of curvature, superelevation rate, length of horizontal curve, and compound curve ratio. Vertical alignment checks include tangent grade and vertical curve length. The Policy Review Module can also check stopping, passing (on rural two-lane highways), and decision sight distance.

This module can be applied at several stages in the highway design process. During project planning and scoping for improvement projects on existing roadways, it can provide an initial assessment of how the existing geometric design compares to current design guidelines. For all projects, it can facilitate quality assurance checks throughout detailed design and design review.

See IHSDM Library for References

Updated: Monday, December 2, 2019